Cleaning your monitor on the regular basis during the house cleaning will help you see the display more easily. There are few solutions that are available to purchase, but you can easily create a solution by using products from your pantry. Follow tips by house cleaning palm beach gardens to properly clean your monitor.
Power down the monitor:
During the house cleaning process powering down the monitor will not reduce the chances of electrocution but it will also help you to see the dust and grime that you cannot see on the screen.
Wipe the dust off the monitor:
During the house cleaning process you need to go slow in the circular motions. Make sure that you avoid putting extra pressure on the screen/monitor. Also, be sure that you only use lint-free cloth and which is non abrasive to wipe. Using a large cloth is the best possible solution as there will be potentially less chances to reduce the risk of leaving streak marks.
Suggested non-abrasive cloths:
- Microfiber cloth
- Cotton tea towel
Avoid the following, as they are too abrasive:
- Paper towels
- Dish towel
- Facial tissues
Apply cleaning solution to the cloth.
When house cleaning make sure that you don’t directly spray the solution on the monitor as the drips can cause malfunctions and it might permanently damage it. Instead of that you can spray the cloth with the cleaning solution and apply small amount of solution at a time as if there is excess solution it might cause damage as well.
Clean the grime off with the cloth.
During the house cleaning you should work in the small circles and try to avoid direct pressure on the monitor. Don’t scrape any smudges and allow the cleaner to dissolve them.
- During the house cleaning process you might want to repeat the entire cleaning process in order to get rid of stubborn stains and the tough spots that are on your monitor or lcd screen.
- During the house cleaning process you need to wipe off any residue or excess moisture once you are done with the cleaning.
Let the monitor dry.
When house cleaning just try to make sure that your monitor or lcd screen is completely turned off before you power it back on. Like this there will be minimum risk of moisture that can damage the internal components.
Turn it on:
Once you are done with the house cleaning process and your monitor/lcd screen gets dry plug it back in the power socket and then turn it on to enjoy your favourite shows.
When house cleaning don’t use blow drier or any other heating material to speed up the drying process. Leave it to get dry by air.
If you are searching for more house cleaning lcd tips then you must get in touch with our local house cleaning palm beach gardens experts for more tips and tricks!